Vase Mode Miniatures Storage Box with lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick print box and lid with an insert for 25mm Miniatures. Other sizes to come.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution
I couldn't find a miniature storage box that I really liked so I used my limited skills to make one. I started with Finn's vase mode box and NotTheCat's stand and cut them up to make an insert.
I printed the box and lid in Spiral Vase Mode, 0.4mm wall with a 0.4mm nozzle at 0.24mm layer height in PLA. It's flexible but seems to get the job done. Insert is printed at 0.2mm layer height, 2 walls, 10% Gyroid infill in PLA.
Eventually I plant to do a 50mm version for large based minis, as well as testing out a version with 0.8mm walls to see if it adds enough strength to make it worthwhile.