Stepcraft 43 mm holder for 33 mm laser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for securing a 33 mm diode laser to a Stepcraft CNC 43 mm mount
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is an adapter I created to mount a 33 mm 0.5 W laser that came with my old 1610 CNC machine to a Stepcraft 43 mm holder.
The parametric model was created in FreeCAD. The files I publish match what I printed. It works, but it could use some tweaking - the “Holder OD” parameter could probably be made 0.5 mm larger, because with the current version, I have to tighten the Stepcraft holder screw quite firmly.
Printed on Prusa MK3S from Prusament PLA, but PETG would be a better option for more powerful lasers to prevent softening from heightened temperature.
0.3 mm layer height, 15 % infill, 3 vertical shells, support on build plate only; to be printed upside down (smaller outer diameter facing up).