Housing for Simple Handled Thermal Imager
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The SHTI (Simple Handled Thermal Imager) found on Amazon HERE (not affiliated, I don't make money from this link)…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The SHTI (Simple Handled Thermal Imager) found on Amazon HERE (not affiliated, I don't make money from this link) comes as a bare circuit board. I made a basic housing to protect it. It includes an optional lens guard that can be glued on, and buttons that click into the housing so they don't fall out.
Print Settings
Rafts:
No
Supports:
No
.2mm for housing / .1mm for buttons and lens
Infill:
20%
Notes:
Designed to print without any supports. Print buttons and lens upside down. Both sides of the housing with the outside down.
All pieces are self aligning. The housing snaps together without the need for glue or fasteners, but you can add some in the grooves is desired. Glue is required to place the lens guard, and should be done first. Click the buttons into the screen facing half of the housing before assembling the two sides.
Category: Camera