Anet A8 Filament Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
-- ATTENTION -- Though this filament guide works, if you have an extra bearing lying around, you should take a look at…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
-- ATTENTION --
Though this filament guide works, if you have an extra bearing lying around, you should take a look at my improved one. https://www.thingiverse.com/thing:2502487
This is a filament guide for the Anet A8. Intended for a spool positioned behind the printer.
I didn't want to put my spool holder on top of the printer, so I kept it behind the printer and designed this part.
The picture is a tiny bit different from the model. I decided it needed a slightly wider base afterword. Although I have provided the .ipt file where the parameters can be adjusted if desired.
-- WARNING --
Abrasive Filaments will cause a notch to be carved into it and can cause excess friction
Print Settings
Printer:
Anet A8
Rafts:
Yes
Yes
Resolution:
0.3 mm
30%
Notes:
I did it at 0.3mm, although for better aesthetics, a higher resolution could be printed.
Category: 3D Printer Accessories