1 / 1
Brodit angled mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This model ensures that your Brodit phone holder is more angled towards you as a driver.
It has a 25 degree angle to the left upwards.
The screw holes are wider due to the angle and pitch of the screws.
I created this model because the Skoda Octavia holder model for mounting just below the air vent was angled straight towards the back seat and not the driver. The phone holder itself can be adjusted, but I didn't find this sufficient so 3D printing to the rescue 🥳
I would suggest printing this with 100% infill and since it is not able to bend during the heat I would say that printing in PLA would be sufficient.