Simplified Bambulab HEPA & Carbon Filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simplified Bambulab HEPA & Carbon Filter
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hey!
Ive edited the original design from the HEPA & Carbon air filters. I experienced it was a bit messy to take out the Carbon tray. It was hard to close and once you put it verticallly in the filter, all the carbon pieces fall down and to top part is not covered with the carbon pieces.
So i removed the tray and made a more simplified version. Just throw in some of the carbon and close the filter housing with a lid. The lid is air tight due to 2 TPU lines running across the lid.
If you want to refresh the carbon, just take the filter of the printer and throw the carbon away.
Its easy to refill if you use the funnel which comes with it.
The magnets I used are 6mm! Be aware of that.
Print settings:
° Infill 25% or more
° Support YES, Tree support
° Material: ABS , ASA , PETG