1 / 2
HP ZBook Fury Vertical Laptop Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vertical Laptop Stand for HP ZBook Fury 16 G10 or any thicker laptop
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 361
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I needed a Vertical laptop holder that would hold a thicker laptop. My ZBook is roughly 1.25" or 31.75mm thick. These holders fit perfectly. You will need to print two.
I used PLA with a 40% Infill to give it some strength