Bambu Lab Filament Swatch with 12x22r2 Label
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the original Bambu Lab Filament Swatch with a slot for a label and also stepped pattern
- Ocena
- 4,962 / 5
- Polubienia
- 415
- Pobrania
- 3000
- Wydruki
- 32
- Wyświetlenia
- 8914
- Oceny
- 26
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original Bambu Lab swatch is OK but it had a few things that needed to be fixed.
label: I've added a a slot for a standard 12x22 label with 2 mm corner radius - like those for Niimbot or Brother Label printers. If you don't have one, you also can use my Template and just use a regular printer and cut them out
opacity test: Additionally i've added a steps to test the transparency/opacity of various layer heights.
strenght: Since the "lock mechanism thingy" is a bit flimsy and breaks on brittle filaments, i've also added some minor support.
The swatch is otherwise dimensionally identical to the original.
Printing
- Print with your preferred settings
- steps are a multiple of 0,2 mm - so either print in 0,1 or 0,2 mm layer height
I've added a print profile for Bambu Studio with either 1 or 4 swatches