Siemens MTP Unified panel stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand for Siemens MTP Unified HMI panels. Useful for programming at the desk. Fit 7" to 15" panels, maybe larger as well
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 235
- Wydruki
- 1
- Wyświetlenia
- 619
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Stand for Siemens MTP Unified HMI panels. Useful for programming at the desk. Fits 7" to 15" panels, maybe larger as well without the stabilizer.
The stabilizer bar is optional, but prevents the stand from sliding apart by accident.
Fits on my 220x220 print bed. Print on the large flat side. The stabilizer bar can easily be cut in your slicer to fit the bed. I recommend an angled dovetail joint for easy assembly.
The model is available on Onshape: https://cad.onshape.com/documents/84422a346c0b00d147201be6/w/bad557762a556aaa65875faa/e/fab0b785eaab46462929014a?renderMode=0&uiState=66e45a86a35c2d6760455bb7