1 / 11

Tatra T6A5 by-MrHan/24 1:32

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

MrHanjak

@MrHanjak

The model is probably not quite ideal for assembly. But it couldn't be done otherwise.

Ocena: 5 / 5
Polubienia: 176
Pobrania: 472
Wydruki: 9
Wyświetlenia: 3263
Oceny: 7

Aktualizacja u źródła: 12 paź 2024

Informacje o modelu

Źródło: Printables
Kategoria: Vehicles
Licencja: Creative Commons — Attribution — Noncommercial — NoDerivatives

Szczegóły Pliki (16)Wydruki i komentarze (Wydruki: 9) (Komentarze: 22)Remiksy (0)Kolekcje (140)

⚫Tatra T6A5⚫

Of course, even with this model, I am not satisfied with everything. I had to leave out quite a bit of detail.
The model has a lot of parts, but it couldn't have been done better. This is the last model that is assembled in such a complex way. It was just for the test model. I want to focus on models and putting them together. And limit the number of parts. I recommend using 3D varnish on larger surfaces. Where the edges could be raised. I made this model at the request of several fans. It was quite challenging. Please keep this in mind when rating. I never planned to model this model. As I said before. This model is not ideal for gluing or folding. I want to focus on some scifi models that I have been planning for a long time. This is, for example, the series Terra Nova or Doctor Who.

Look forward to new sci-fi models or models from Harry Potter, for example! 😉

➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
Follow me on YouTube for more info about what you can look forward for.
■ YouTube
➔ https://www.youtube.com/c/MrHanjak2017

■ Video

🔳 INFO 🔳

■ Steel sheet
➔ PEI

■ Nozzle
➔ 0.4

■ Layer height
➔ 0.15mm QUALITY

■ Material
➔ PLA

■ Infill
➔ 15%

■ Circuit
➔ 3

■ Supports
➔ YES

■ Glue
➔ YES