Elegoo Neptune Left Side Screen Mount, uses OE magnets & screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Uses original magnet and screws. Screw threaded into my PETG model. Print 3 of the spacers to use with orig mount screws
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Modeled in Fusion 360. It utilizes the original screen mount magnet and magnet screws. The screws threaded into PETG & tightened.
The spacers will allow use of the long original M4 mount screws that initially threaded into tapped holes on the right side of the machine for the original screen mount. Attach to the machine using T-slot nuts. M5 T-slot nuts and 10mm long screws (omitting the spacers) would work better IMO, the M4 T-slot nuts were loose enough in the slots to spin.
Edit: I printed it upright & only used two (Orca, tree organic) supports, one under screw hole plate then one under magnet opening top surface. All other features printed acceptably without supports.