Pumpkin mold (candle container)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mold for casting pumpking from plaster
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 650
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's a mold for casting a container to cast candle into, made for my friend. I coated everything with primer, then painted and last but not least coated with clear hi-gloss varnish.
For pumpkin casting i used standard building plaster from home depot
You need to print 2x mold parts 1 and 2, and assemble it alternately with mold insert on top. Before assembly i recommend covering insides with thin layer of petroleum jelly. It really makes life easier
Initially i tried to do this in openscad using this as the base, but it turned out to be too complex for the program, so i switched to blender.