Ridley V2 - (SSBB)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved version of the Ridley figure I made awhile ago.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 482
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an improved version of the Ridley figure I made awhile ago, Ive changed many of the limb and body articulations, size is still a problem as many of the parts are within the limit of what my fdm printers can do. Im still leaving the original up, but this one is the definitive version going forwards. The guy can support his own weight this time around, but the stand is still required for any kind of posing.
This figure is still not print friendly in some parts, so Im not quite finished with this, but there is only so much that can be done with this model and the design choices Ive made years ago, if I decide to do another one, I might just go for the Ultimate model and start all over again.
Assembly instructions are included.
Print Settings
Printer Brand:
Hellbot
Printer:
Hellbot Magna 2 300
**Rafts:**
Yes
Supports:
Yes
**Resolution:**
0.12
Infill:
15
**Filament:** 3N3, Printalot PLA fucsia/purple, red, green/yellow
Notes:
Tongue is red, eyes and wing membranes can be made in glow in the dark filament.
Category: Video Games