1 / 7
Wall pliers holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a pliers holder for the wall. We connect the wall holder with the screwdrivers holder. We will use M4x20 screws and M4 nuts for connecting. The counter piece of the holder is installed on the wall using 4x30 wood screws, which you can find here: Board holder for storage tools
Printing instructions for holder:
filament PLA
0,2 mm layer height
without supports
infill 20%
Link for other tool holders:
- Makita drill, screwdriver, multitool and 18V Battery holder
- Clamp wall holder for Bessey GearKlamp
- Sander holder
- Angle grinder holder
- Screwdriver holder
- Hammers holder
- Wrench holder
________________________________________________________________________________________________________________
If you want to support my other projects, you would contribute to filaments at PayPal. Thanks.