1 / 1
Skadis mount for cheapo 4-port USB hub — zdjęcie 1

Skadis mount for cheapo 4-port USB hub

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two-piece mount for trust.com/15005, using Skadis T-nuts.

Ocena
0 / 5
Polubienia
3
Pobrania
23
Wydruki
0
Wyświetlenia
180
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Specifically made for this old cheap 4-port USB hub: https://www.trust.com/en/product/15005-barra-4-port-usb-2-0-mini-hub

You'll need:

  • This model, twice. For one print, mirror it along the X axis.
    • (the model is a holder for one side, you need two to hold the hub from both sides)
  • 2x Skadis T-nut, 2.5 mm version
  • 2x M2.5 countersunk machine screw. 16 mm length worked for me.
  • 2x M2.5 hex nut

Follow instructions on the T-nut model for installation.

Tagi