1 / 2
Suzuki Ignis Center Air Vent Flap Linkage (73611-81A00)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Suzuki Ignis Air Vent Flap Linkage (73611-81A00)
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 656
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (13)Powiązane
This part should also fit for other Suzuki models such as the Jimny and possibly Wagon R+ related cars (i.e. Vauxhaull/Opel Agila) of the same era.
For any broken off flap mount points, one can use small screws of similar diameter, set with a soldering iron as the one seen in the photo.
I HIGHLY recommend printing this in a material that can withstand the heat. I went with ABS, ASA is even better and PETG should be ok for colder climates.
