Dremel Large Sanding Drum
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Large Sanding Drums for Dremel with 40mm diameter and 30mm height.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 419
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this large sanding drums for Dremel, to myself, kinda in the rush. The label is crushed by the washer, but still readable. The flat bottom part was printed in PLA without support, but survived. I modeled this for my personal use, but decided to share, so don't expect any updates. They work well, for me, as is.
For each drum you will need:
1 M3 bold about 50mm long
2 M3 washers
1 M3 nut (i used self locking nuts because it was i had available but i recommend)
The slit is kinda useless. I just super glued some ordinary sandpaper around the body. The label was highlighted with some correction pen.