[BACKUP] Yet Another Filament Sample - Keycard Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a backup copy of venegade's great filament swatch "Yet Another Filament Sample - Keycard Edition".
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Attention: This is a reupload of the awesome filament swatch by thingiverse user venegade.
I did not modify this model in any way, I just copied it over to printables as a backup in case the original goes missing. (And because I'm lazy and I don't want to have to search for it again, if I loose the print file ;-)
The following is the original description by venegade:
So I made a filament sample card earlier this year, and I printed alot of them. However while larger, I didn't realize how large and how much material was used compared to the smaller more common filament samples people use. So I came up with another one!
This one is about 60% smaller than my original one, and has a few extra features. I wanted it to have some nice details as well, and it kind of turned into a futuristic keycard. The extra features are:
- A small bridge test
- A 45° overhang test
- A 0.5 mm transparency test
This filament keycard prints flat with no support and takes about 18-20 minutes with nominal settings.
p.s. There is plenty of space on the back of the keycards, so I took the time to print small labels for each the brand, type, and color. Font size was 10pt and I used Bebas Neue.
Double p.s. if you want to store these in a nice tray, here is a link to the tray I designed: https://www.thingiverse.com/thing:3593590