MiSTer PI Console Case with TapTo integration
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified design of the RetroFrog MiSTer console case but with a TapTo dock
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 204
- Wydruki
- 1
- Wyświetlenia
- 2135
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This remix is still a work in progress!
TapTo dock plate is available separately at https://www.printables.com/model/1007354-tapto-nfc-consolized-dock-for-mister-pi-case as it has an incompatible CC license.
Additional items needed for this:
- Switch for USB C that maintains PD signal
- https://www.canakit.com/canakit-usb-c-pd-piswitch-for-raspberry-pi-5.html (this specifically expects the switch version rather than button)
- 3.5 mm plug prewired (x2)
- 3.5 mm panel mount jack (x2)
- https://www.digikey.com/en/products/detail/schurter-inc/4832-2300/1731055
- https://www.amazon.com/Nine-3-5mm-Stereo-Panel-Connector/dp/B01C3RFHDC (this should also work, but you'll get 10)
- USB C panel mount extension
- VGA extentsion cable
- https://www.amazon.com/dp/B072KN982G (you will need to cut off a bit of the strain relief for male end to clear the HSDMI extension cable)
- USB C extension cable (to go from switch to Mister Pi
- USB C to A cable (for TapTo), choose an option
- https://www.amazon.com/dp/B0CNT3ZCFR with a type C to A adapter
- https://www.amazon.com/dp/B091CRLJM2 just make one with a remaining type A male breakout board
I also modified the micro sd card extension because I had one lying around from a previous project which can be found here (https://www.aliexpress.us/item/3256801742490754.html)
The top takes 4x M3x4 heat set inserts for mounting the TapTo tray to the top of the case.
Everything else should be the same as the original design (including the top buttons, which can be found in the original design's files)