1 / 5
3D Build Plate PEI PEY sheet Wall holder / stand 235x235 — zdjęcie 1
1 / 5

3D Build Plate PEI PEY sheet Wall holder / stand 235x235

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Minimalist looking wall stand to hold 3 build plates size 235x235 mm, with or without nozzle cleaning silicone.

Ocena
5 / 5
Polubienia
76
Pobrania
270
Wydruki
2
Wyświetlenia
1235
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Standard Digital File License

I made this minimalist wall stand to hold 3 build plates size 235x235 mm, with or without nozzle cleaning silicone. 

The bottom part is made in two versions. One is with screw holes if you want to add screws to your holder to secure it more to the surface you are mounting it, and one version without holes, to use only with double sided tape.

I used the version with screw holes but added the double sided tape too. The upper part needs only double sided tape. 

Since you cannot print the holder for the build plate you use because of the size is too big, I made it to be printed diagonal so it fits the bed. The files have designed support into the model, which you just break off after the print and remove the little remaining plastic either with a sharpie or a sanding paper, and then add double sided tape to mount it to the wall or any other surface.

I have added also the model without support if you have other bigger printer and you can print it horizontal.

Enjoy!

Tagi