Deburring Tool Stand for rear honeycomb Creality K1 / K1C
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand for deburring tool you can find on AliExpress with spare knives included for around 3-5$.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 518
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Standard Digital File License
Stand for deburring tool you can find on AliExpress with spare knives included for around 3-5$. This tool is great for removing sharp edges of your prints, especially after the brim has been removed.
I hate those side mounted stands because they make this beautiful printer look like garbage so I made this one for the rear side to fit into the honeycomb pattern. It is a tight fit so it won't fall out.
Tight fit or not, if you use you tools a lot the tools mounted to any honeycomb will eventually start to fall off, that's why I have used a 3m thick double sided tape on this tool holder. On a different tool holder I put a tiny bit of a glue and pressed it in. Both have never fall out.
Print on regular settings , layer height 0.2
Enjoy, and if you like it leave a like!