1 / 8
Dual Build Plate Film Sticking Fixture for Bambu 256x256 plates — zdjęcie 1
1 / 8

Dual Build Plate Film Sticking Fixture for Bambu 256x256 plates

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dual sided Build Plate Film Sticking Fixture

Ocena
0 / 5
Polubienia
5
Pobrania
36
Wydruki
0
Wyświetlenia
244
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Since I had two Bambu X1 Engineering Plates I wanted to change one Engineering Plate with the High Temperature Plate, but that was the wrong side of the plate for my Film Sticking Fixture. So, I decided to mirror the Bambu Lab Film Sticking Fixture. But, why print a new mirrored fixture and have two tools, when I could combine the two into a single tool. I couldn't find where this had been done, so I modeled a Dual Film Sticking Fixture. Hope someone finds it useful.

 

UPDATE: Please carefully align the sides of the High Temp surface or a side may slightly overlap and edge.  If this does occur, do not try to pull the surface back off to realign.  Just trim the overlapping edge.

Tagi