1 / 5
Support capteur AQARA P1 (détecteur de mouvement et luminosité)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support de capteur Aqara type P1 permettant une fixation au plafond (vis ou double face) ou sur un mur (double face).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
FR
Support plafond ou mural pour capteur AQARA P1 (détecteur de mouvement et luminosité).
Conseils de paramétrage d'impression:
- PETG
- 3 périmètres
- Infill : 15%
- Sans support
- Pièce à imprimer sur la face plane (bonne stabilité)
EN
Aqara P1 type sensor mounting allowing ceiling installation (screws or double-sided tape) or wall installation (double-sided tape).
Ceiling or wall mounting for AQARA P1 sensor (motion and brightness detector).
Print settings advice:
- PETG
- 3 perimeters
- Infill: 15%
- No supports
- Print the piece on the flat side (good stability)