1 / 2
Radiomaster Pocket Hawkeye Monitor Mount 3.5 inch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for Radiomaster Pocket and Hawkeye 3.5inch FPV monitor
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 188
- Wydruki
- 1
- Wyświetlenia
- 1372
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (18)Powiązane
Mount for Radiomaster Pocket and Hawkeye 3.5inch FPV monitor Requires screw (M3x12 works well) to fix monitor to mount. Mount snaps onto Pocket
"To attach, put the bracket over the strap mount point on the centre or the radio at an angle. Then push the back down until it clicks into place. Remove but pulling the two clips at the back away from the radio."
It's not very strong so print with full walls on thinnest parts