Stone Tile Thin Brick Floor - Compatible with Lego (r) Bricks and 25mm TTRPGs such as D&D (r)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tile thin brick that is 3x3 stud sized with 4 tiles per overall square. Print tile floors for your TTRPG buildings!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution — Noncommercial
Love Lego®-compatible bricks? Love TTRPGs? Then you'll love these pieces! These tile pieces are made to fit with a brick system that is designed with 25mm based miniatures in mind (28mm height minis). A 3x3 lego piece is 24mm x 24mm, so while this is not a perfect scale, it is close enough and has worked well in practice.
Use these tiles to add character to your castles, homes for nobles, or anywhere else that tiles make sense for your TTRPG campaign.
Each thin brick uses standard Lego brick sizing (4mm width and length per stud less a 0.2mm buffer for the overall object, with 3.2mm height), with some modifications for a tighter fit and to accommodate the nature of printing PLA.
Print Settings:
Print at 0.2mm with all other standard PLA settings, no supports required. Print these tiles with the brick system bottoms facing up - this helps ensure there is no warping of the connection pieces and that these pieces will fit on a standard brick layout.
NOTE: This is not in any way endorsed by or attempting to claim any relationship with the manufacturers of Lego® bricks.