RC Tank T-34 PS. 231-1 Part 3 Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RC Tank T-34 PS. 231-1 Part 3 Frame
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 352
- Wydruki
- 1
- Wyświetlenia
- 2006
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Please make part number 1 “Traks" first because it is the most challenging assembly. https://www.prusaprinters.org/prints/99893-rc-tank-t-34-ps-231-1-tracks
I forgot the "DriveGear6mm" part. Now it has been added.
You also need
-1.5mm piano wire for torsion springs. Two meters should be enough.
-6mm round shaft Length 80mm 2pcs
-M3 x 10mm screws ~25 pcs
-DIN 916 M4 x 8 2 pcs
-DIN 916 M5 x 10 or DIN 916 M5 x 12 2pcs
-Drive shaft bearings 4pcs https://www.prusaprinters.org/prints/101312-rc-tank-t-34-ps-231-1-abs-bearings
-Tracks https://www.prusaprinters.org/prints/99893-rc-tank-t-34-ps-231-1-part-1-tracks
-Wheels https://www.prusaprinters.org/prints/99930-rc-tank-t-34-ps-231-1-part-2-wheels-and-support-ar
The project is not 100% complete.
Parts “Frame_rear” and “Hook” are untested.
Assemly.
Because of the Covid-19, I haven’t been able to print to school printers. Please donate to me and I'll buy my mk3s printer and finish the project.
The print settings are based on my memory images and may not be correct.