Extendible Clamp Rack for Jorgensen E-Z Hold (medium duty)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extendible Clamp Rack (or Holder) for Jorgensen E-Z Hold bar clamps. Available for multiple mounting options.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 207
- Wydruki
- 3
- Wyświetlenia
- 845
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Clamp rack (or holder) for Jorgensen E-Z Hold (medium duty) bar clamps.
Multiple options exported as step format (3MF samples included for web preview).
Mounting options:
Wall mount: can be screwed to the wall but requires something to create a distance of at least 45mm to the wall
Side mount: No holes for direct wall mounting (reduces printing time) but mountable only on the side. Requires M4 threaded rod (length as per intended rack size).
Dual mount: Has holes of wall mount option plus a second one per “clamp” slot
Extending:
Multiple smaller racks can be connected for creating larger racks than what would fit on a printer. Connection requires wooden dowels 6x30mm.
Note: Dowels are optional for wall mounted systems (but help greatly with alignment and will also increase the overall strength)
Printing:
I printed mine in PLA with a 0.6mm nozzle, 0.28mm layer height, 3 Walls, cubic infill (15%), 4 top and bottom layers.
Note: settings are not that critical
Prints without support
Compact Case:
I used the side mount option to create a compact case (two racks placed back to back). Dimensions for this arrangement are included as pdf (see also last two photos).