1 / 3
TrackIR Wall Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A permanent wall mount for your TrackIR sensor. TrackIR 5 was used for this 3D Model.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
TrackIR (https://www.trackir.com) is a beloved 'Head Tracking System' for Gamings. TrackIR 5 was used for this 3D Model.
This 3D Print allows to keep permanently the main sensor against the wall in front of you (behind your screen).
Details explanation for mounting:
- This design requires ‘Double-sided mounting tape’ to stick it against the wall (e.g. Tesa Powerband).
- The hole at the bottom is for passing the USB connector through
Potential improvements:
- Holes for screwing into the wall
- An improvement to hold your headset mounted with the ‘TrackClip Pro’, such as:
- A hook below to hang your headset
- A rounded shaped center (just above the USB hole)
- A holder for the ‘headset charging cable’ while disconnected during play time
Disclaimer:
- on the picture I drilled the hole that was missing in my 1st prototype. This hole is now integrated in current file.
Feel free to comment improvement.
Happy printing and gaming