1 / 6
Lüftungshebel für Smart Roadster 452 (Coupe) Ventilation Lever — zdjęcie 1
1 / 6

Lüftungshebel für Smart Roadster 452 (Coupe) Ventilation Lever

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ersatzteil für die Lüftungshebel des Smart Roadster / Coupe Baureihe 452 // Ventilation Lever replacement part

Ocena
5 / 5
Polubienia
9
Pobrania
132
Wydruki
1
Wyświetlenia
506
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

(English version below)

Ersatzteil: Lüftungshebel Smart Roadster 452 (auch Coupé)

Die Lüftungshebel des Smart Roadster Coupés können nach ein paar Jahren abbrechen. Tatsächlich sind die Lüftngshebel beim Hersteller noch als Ersatzteil zu bekommen - für 16 Euro pro Stück! 

Die Hebel sind von vorne eingesteckt und können sehr einfach getauscht werden (ziehen). Eine Herausforderung stellt das höchstens dar, wenn der Lüftungshebel bündig abgebrochen ist. 

 

Konstruktion:

Der Hebel ist mein erstes Projekt in FreeCAD. Ich hatte ursprünglich das gesamte Teil in einem “Guss” gestaltet, was jedoch beim Drucken Probleme bereitete, da die Reste des Supports den Hebel schwer montierbar machte.

In der Folge, habe ich mich dazu entschieden, den Bedienknopf separat zu drucken und den Hebel dann steckbar zu gestalten. Das hat den weiteren Vorteil, dass der Hebel aus einem anderen Material (und ggfs. einer anderen Farbe) gedruckt werden kann :-)

Die FreeCAD Files liegen bei. im Unterordner sind auch einige Varianten zu finden, die ich im Laufe der Konstruktion erstellt (und verworfen) habe.

Der Original-Hebel hat zwei Aussparungen, und rechts und links einen kleinen “Knubbel” zum Einrasten. Ich habe festgestellt dass diese nicht notwendig sind und die Hebel ggfs instabiler machen.

 

Drucken des Teils:

Sowohl der Hebel, als auch der Knopf können ohne Support gedruckt werden.

Layerstärke: 0.1 mm !!

Der Hebel sollte in PETG oder ABS gedruckt werden, um Hitzebeständigkeit im Sommer und Bruchfestigkeit zu garantieren!

Die “Tasche” in die der Hebel in den Bedienknopf eingesteckt wird, ist so konstruiert, dass die Toleranz meines Druckers (TEVO Tarantula) ein Einstecken auf Passung erlaubt. Ggfs. muss der Knopf für deinen Drucker angepasst werden.

 

Nachbearbeitung:

  • Beim Einstecken des Hebels ist darauf zu achten, dass der Grat (Key) im mitleren Teil des Hebels auf der richtigen Seite zu liegen kommt (Siehe Foto) !!
  • Einkleben des Hebels in den Knopf: Ich verwende dazu Sekundenkleber
  • ggfs. nachbearbeiten der Knopf-Oberfläche mit feinem Schleifpapier
  • ggfs. lackieren der Knopf-Oberfläche 

 

Wie immer gilt: Bitte die Lizenz beachten (s.u.)

 

 

ENGLISH:

 Spare part: Ventilation lever Smart Roadster 452 (also Coupé)

The ventilation levers of the smart Roadster Coupé can break off after a few years. In fact, the ventilation levers are still available from the manufacturer as spare parts - for 16 euros each!

The levers are inserted from the front and are very easy to replace (pull). This is only a challenge if the ventilation lever has broken off flush.

 

Construction:

The lever is my first project in FreeCAD. I had originally designed the entire part as a “cast”, but this caused problems when printing, as the remnants of the support made the lever difficult to assemble.

As a result, I decided to print the control knob separately and then make the lever pluggable. This has the further advantage that the lever can be printed in a different material (and possibly a different color) :-)

As always, I add the FreeCAD files for your reference and enjoyment!!

 

Printing the part:

  • Both the lever and the button can be printed without support.
  • Layer thickness: 0.1 mm !!!
  • The lever should be printed in PETG or ABS to guarantee heat resistance during summer and break resistance!
  • The “pocket” into which the lever is inserted into the control knob is designed in such a way that the tolerance of my printer (TEVO Tarantula) allows it to be inserted to fit. If it's too loose, the button must be adapted for your printer.


Post-processing:

  • When inserting the lever, make sure that the ridge (key) in the middle part of the lever is on the correct side (see photo)
  • Gluing the lever into the knob: I use superglue for this
  • If necessary: finish the surface of the knob with fine sandpaper (>400 grit)
  • If necessary: paint the button surface 

 

Tagi