1 / 8
Print-Sheet-Stand for 7 Printplates
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print-Sheet-Stand for 7 Printplates, the added "Shee-Stop"-Function at the end helps that the Printplates dont slip out
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Hello,
I made a Print-Plate-Stand (for 7 Plates) that has a small Footprint. On the pictures you can see some Sheets (for the Prusa MK3/MK4).
- Length is 240mm, Width 65mm, Height 45mm (you can stretch in slicer if you need different length)
- The 3 Holes added on the side are for saving Filament.
- The Print doesnt need much infill, it was printed myside with a 0,6 Nozzle and PLA, around 4 hours.
- Width for each Sheet is 3mm, which means you can scale it down in slicer, if you need it smaller
- The added "Plate-Stop"-Function at the end helps that the Printplates dont slip out of the Holder, when you pick them up by hand.
Lets organize our lovely plates :)
Cheers, Dave