1 / 9
The Lost Expedition Box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
I designed this box for a friend who added sleeves to its "The Lost Expedition" cards.
To make room for the cards, I had to use a 1mm base for the box. It bends a little but it's solid enough for the task.
I also made an untested version for printers that can't print the whole box. I'm not sure if the jigsaw design will work for the 1mm base. If it doesn't, it should be possible to glue both parts together.
Print instructions
Category: Games Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 20
Infill: 20%