AMPS Ham Radio Mic Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount HAM radio or CB microphone to AMPS mount
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 169
- Wydruki
- 0
- Wyświetlenia
- 615
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I was looking for an option to mount my HAM microphone to my AAL Molle Panel in my Jeep. https://americanadventurelab.com/product/jeep-wrangler-gladiator-overhead-molle-shelf/
AAL has a good magnetic solution that I'm guessing works well with the ICOM radios they use, but my Yaesu microphone has an offset mount and doesn't work well with their magnetic solution. https://americanadventurelab.com/product/magnetic-molle-mount/
Other options I found were fairly loose and I'm sure work fine when mounted vertically, but as I was mounting horizontally, I needed something tighter.
I modeled in a dimple in the center to help hold the mic once installed.
I printed out of PETG-CF to help deal with the temps in the Jeep when sitting outside. The temps might be a bit much, so I might have to reprint in ASA, PA-CF or PC-CF. I used PVA for supports, but you can print without supports if you have good bridging.
You can print my Molle-AMPS adapter to mount it the way I did. https://www.printables.com/model/1008703-molle-amps-adapter