Ender 3 V3 KE - Filament Sensor Mount on printhead
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This version is printed in one piece and includes a receiver at the top for a PTFE tube.
- Ocena
- 5 / 5
- Polubienia
- 131
- Pobrania
- 919
- Wydruki
- 11
- Wyświetlenia
- 3540
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This version is printed in one piece and includes a receiver at the top for a PTFE tube.
Installation:
1. Attach the filament sensor to its original plate.
2. Fit the sensor with the plate into the mount by tilting the sensor so that it snaps into the top tab of the mount and press to fit the tube from the plate.
3. Screw the plate onto the back of the mount using the original screw.
4. Screw the mount with the sensor using the two original screws to the print head.
5. Insert the PTFE tube into the top; friction will hold the tube in place without the need for anything else.
For better convenience and aesthetics, it is recommended to reposition the filament sensor cable through the print head's cable assembly, but this is not absolutely necessary.
My print settings (optional):
- Layer height: 0.16 mm
- Walls: 5
- Top/Bottom Layers: 6
- Infill: 20% Gyroid
- Support type: Normal
- Outer wall speed: 35 mm/s
- Inner wall speed: 50 mm/s
- Infill speed: 100 mm/s
- Weight: 21.3g
Recommended material: PETG
Enjoy!