MHP LMG Speedloader
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool to help load up the belts for my LMG design
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 803
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a speedloader, or something like it, for the LMG I designed. You just insert the links, and it holds them in place while you load darts.
-------------------------
I have added a compliant pawl plate, which means it's a single part with all the bendy bits attached. Print with bed plate supports only, on it's side, and you should be good to go with even fewer parts!
--------------------------
There is a larger version, which has a 10 dart loading part, or the smaller version that just holds the links for single loading each dart.
The bottom plate holds as many of the pawls as you want, although the file is all 11 of them. I recommend using the last two, and the first one for sure, and only whatever you want to help hold more links in place. Each pawl will need a small spring and filament for a pin to hold it. There are spots for securing things with m3 screws, but that may not be necessary. Once the pawls are springed up and pinned in place, the plate slides into the base from the right until it's flush.