Tim013-1 Overhead Bassinet Mobile Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model fits snugly onto the side support of the Timkos Tim013-1 Bassinet.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi there,
We purchased a mobile for our baby and found there was no way to effectively mount it on the bassinet. So I took it upon myself to design a new mount for the bassinet.
It works brilliantly and is easy to install.
The pole 3mf file is designed to fit snugly over the top of the extruding part at the top of the mount.
I have printed this successfully on a Creality Ender 3 V3 KE.
The strength settings are quite high as I had printed an earlier one and snapped it off by bumping into it, so it does need a bit of extra lateral strength provided by the additional wall loops and infil.
Recommended:
Wall loops: 5
Infill: 30%
Material: PLA+
Thank you!