1 / 1
Prusa i3 MK3S fs-cover with bigger slot for shimmed IR sensor — zdjęcie 1

Prusa i3 MK3S fs-cover with bigger slot for shimmed IR sensor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This remix fixes fs-cover interfering with IR sensor PCB when shims are placed under the PCB

Ocena
0 / 5
Polubienia
0
Pobrania
18
Wydruki
0
Wyświetlenia
101
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

When spacers are used to shim the IR filament sensor, original fs-cover no longer fits. I fixed this by making the slot bigger.

I printed mine on the MK3S from Filament PM PLA+ with 0.20mm SPEED profile in PrusaSlicer, but since the original part is PETG, that would also be a good choice. 15% infill, no supports.

Tagi