Prusa Rotation Indicator - Flux Capacitor (MMU)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MMU version of mhoyt's Flux Capacitor extruder rotation indicator.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I really liked mhoyt idea of transforming the extruder into a Flux Capacitor but I wanted to make an MMU version of it. For people that don't have an MMU, you should check out the original design (https://www.thingiverse.com/thing:2788718).
Now, you just need to make sure to never exceed 55 revolutions per minute. You don't want to send you printer back to the future. 8)
In action: https://youtu.be/oDZYySVMuE4
Random comments:
- You'll need an 8x2mm magnet, or adjust the "magnet adapter" height if you have a 1mm or 3mm.
- No support needed but some pieces will have to be repositioned on the bed.
- For the FluxBackground, I strongly suggest to starts the print with the letters. You'll get 'bolder' letters that way.
- Works with R3 revision or MK3S.
Print instructions
Category: 3D Printer Accessories Print Settings
Printer Brand: Prusa
Printer: i3 MK3 MMU 2
Rafts: No
Supports: No
Resolution: 0.2
Infill: 15
Filament: Filaments.ca PLA multiple