Quest 3 Facial Interface - Q-Pro Style Short & Simple
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement facial for the Quest 3 based on multiple other models. This one is as minimalist as possible.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 289
- Wydruki
- 1
- Wyświetlenia
- 4133
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement for the stock facial interface for the Quest 3 that works like the one on the Q-Pro. I use it with the Meta Quest Elite Strap, and I also use a chinstrap.
For more info on the chinstrap see my chinstrap cup project.
The included files are from Prusa slicer and include the support settings that worked well for me on the Prusa MK4 with a 0.6mm nozzle in PLA or PETG.
The numbers in the model name, like 25/85 are the angle of the pad, and the radius of the pad curve. The 15 deg pad is the more vertical one. At this point, I use the 15/85 and it works well with the way I wear the headset.
Two of these models are now available from Slant3D Teleport:
You will need to provide some sort of pad. I recommend one inch thick, soft foam. I uploaded a template that you can use with two clamps to squeeze the foam flat making it easy to cut. I clamped one inch foam between the two templates so that the line of foam I was cutting was only about 2mm thick. This worked pretty well. The holed in the templates are for bamboo skewers which I used for alignment.
Video:
CA glue works well for attaching the foam to the interface, as does 3M spray adhesive. I will take some photos of the process when I get the chance.
If you want to buy something similar, I have tried this one from Amazon and is well made but bulky.
Source - I got the idea from multiple sources.
- The first one I saw was this https://www.thingiverse.com/thing:6277086 which is based on https://www.thingiverse.com/thing:6269738
- The chopped design I first saw done by the Facer/Fluid folks: https://www.thingiverse.com/thing:6308607
- I got the Q3 interface outline from the mesh face_cover_pro.stl which seems to be from https://www.thingiverse.com/thing:6277086