1 / 1
IMPROVED Dial Indicator Holder for Neptune 4 Max 20x20 extrusion
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed this model to fit a Neptune 4 Max Its made to just snap over the top and bottom of the rail, and it a bit longer
- Ocena
- 4,5 / 5
- Polubienia
- 11
- Pobrania
- 163
- Wydruki
- 1
- Wyświetlenia
- 632
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (16)Powiązane
What:
I wanted to improve my last design in my new CAD program Onshape. I beveled the whole design and increased the strength. I also added improvements to the Variables so that anyone can just plug in their use case dimensions.
Why:
I wanted to improve the last design as my last wore out.
How:
Modeled in ONSHAPE
Print Settings:
Important settings will be marked with Orange color *All Settings are a suggestion but what it was designed for
| Layer Height: | 0.4mm |
| Nozzle: | 0.6mm |
| Infill: | 15% |
| Infill Type: | Gyroid |
| Material: | PETG |
| Supports: | No |
| Vertical Shells: | 2 |
| Raft/Brim: | No |
Stats:
| Mass: | 12 g |
| Volume: | 9239.88 mm³ |
| Surface Area: | 5417.9 mm² |
CAD variable table
| InnerBoxWidth | 19.225 mm | X Direction. Should be your extrusion size -1mm |
| InnerBoxHeigth | 20 mm | Y Direction.Should be your extrusion size. |
| InnerBoxThickness | 18.034 mm | Z Direction |
| ProngHeigth | 5.500 mm | Y Direction |
| TailWidth | 3.125 mm | X Direction. Change if to bendy. also increases clamping pressure |
| TailHeigth | 34.500 mm | Y Direction. how low the dial should be |
| BumpWidth | 5.450 mm | X Direction. Extrusion protruding bumps Width |
| BumpHeigth | 2mm | Change this if mount is falling off |
| Vally | 1.042mm | Calculated. do not change |
| DialGaugeDiameter | 8mm | Insert the diameter of your dial gauge throat |
| DialEngagment | 15 mm | How much collar there is to hold dial. cannot be less than thickness |
| DialEngagmentThickness | 2 mm | How thick the collar is. change if your dial is heavy. |