60 Degree Connector Compatible with LEGO Trains
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 60 degree connector for LEGO train tracks (not DUPLO).
- Ocena
- 5 / 5
- Polubienia
- 70
- Pobrania
- 506
- Wydruki
- 6
- Wyświetlenia
- 1626
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution
A 60 degree connector for LEGO train tracks (not DUPLO). Updated with a fixed .STL (this was one of my first designs and there were some small overhangs I hadn't noticed).
No supports needed, but there are small ones built in at the end of each track that need to be clipped off before this will connect with other track pieces. If you try to attach it, it will be very obvious what needs to be removed. They're already gone in the photo here but you can see them in the model.
Remixed from the straight track by Junkmail90210 (https://www.thingiverse.com/thing:2747825)
Print Settings
Printer Brand: Dremel Digilab
Printer: 3D45
Rafts: No
Supports: No
Resolution: 0.2
Infill: 50%
Filament: Dremel PLA black