V2 Minimalistic Laptop folding feet - heavy duty landing gear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalistic easy to print and assemble folding feet for laptop rear side elevation and better air flow - heavy duty…
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 165
- Wydruki
- 3
- Wyświetlenia
- 1201
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Minimalistic easy to print and assemble folding feet for laptop rear side elevation and better air flow - heavy duty version with many new features.
It's an evolved V2 version of initial model of Minimalistic Laptop folding feet.
New design is inspired by spacecrafts landing gear, intended for use on various surfaces.
Features:
- Heavy duty construction to support heavier and larger laptops
- Elevation is 40mm to address much longer length of bigger laptops (added 30mm version)
- Large flat foot area is distributing weight and providing higher stability on soft surfaces
- Self-aligning "landing angle", allowing secure placing on uneven surfaces
- Can be mounted over the ventilation area, to provide extra guard of proper ventilation flow on soft surfaces when extracted
- Multi-hinged design to maintain ultra-compactness, also enforced with steel rods made from a regular paperclip
Print parts A and B, then cut steel rods from straightened paperclip of following lengths:
- 2x 20mm
- 1x 11mm
- 2x 7mm
Hint: to keep steel rods in place securely, flatten about 2mm of one rod end prior to inserting other end.
Connect all parts together as shown on pictures of collapsed foot. Then add 1mm thick strong adhesive foam/tape to the both mount ends, and attach to the laptop while in collapsed position. If your adhesive tape is thinner, use few layers to reach 1mm, otherwise foot will not securely collapse.
So far I printed and tested first prototype on my Lenovo laptop in the central area over the ventilation. It works excellent and supports the weight well.
UPDATE (2025-06-16) Added separate parts for 40mm Heavy Duty model
UPDATE (2025-06-13) Added Heavy Duty version 8mm wider with thicker frame - 30mm/40mm/80mm tall.
UPDATE (2025-01-20) Added more slim version of central bar and foot, to add 1mm space for reducing friction tape on foot bottom. Models are called V3S and can be printed separately
UPDATE (2024-10-10) Added 80mm tall version. It's experimental and not tested, please let me know in comments if it needs to be enforced by making any part wider.
UPDATE (2024-09-25) Added rounded mounts version of 30mm tall feet - file "V3_snow_A_short" to better fit style of laptops with round feet
UPDATE (2024-09-16) Added smaller 30mm version of mount for lower laptop elevation angle. Another improvement is a thin frame to connect both mounts together for preventing adhesive peeling.
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 3 Pro
**Rafts:**
No
Supports:
No
**Resolution:**
0.2
Infill:
20% gyroid
**Filament:** ELEGOO PLA PRO Black
Category: Computer