1 / 3
HDMI5 V1.5 Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
V2 improves the operation of compliant buttons and allows more room for the screen. V1 compliant button work poorly or not at all.
I am working on a mount for the case so you can put it on either side of the printer.
The threads of v1 are ansi 0.3937-12.7 single start threads with a pitch of 2mm. V2 has M10 with single start threads with a pitch of 2mm.
only requires the four M3 screws it comes with.
DO NOT OVER TIGHTEN.
the threads are soldered in so if your lucky you should be able to resolder them if you make the same mistake as me fortunately it should be corrected in V2.