Elegoo Saturn 4 Vent Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Saturn 4 to Dryer Hose Adapter
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 553
- Wydruki
- 1
- Wyświetlenia
- 2853
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Connects to the porthole on an Elegoo Saturn 4 Ultra to adapt to a fan and a dryer Hose to pump air outside.
I assume this would also work with other printers that have an ~72+mm Porthole, it works great on my Elegoo Saturn 4 Ultra, albeit a little bit loose.
(The CAD images may make them look like they're together as one piece but it is 2 separate sides/pieces)
It's meant to work with an 80mm fan and a 3in Dryer Hose(All links are Amazon, no affiliate).
Screws were kind of an afterthought, but the holes should be aligned in the latest version with whichever fan you use/buy.
In my version I used a Boost Converter to power a 12v Fan from the printers USB port (bonus with it being turned on/off with the printer) but you can do it whichever way works for you, as from what I understand most resin printers don't have network support like the Saturn 4 Ultra so you would need the USB port for a thumb drive.
As for specific print settings, I haven't tested higher, but I generally always do a max of 0.16mm layer height for anything that has threads.
I haven't put much work into making the models accessible, I supplied CAD files but don't expect them to be easy to edit, I'm not a professional Modeler.
Possible Future updates:
Larger Variety of Adapters (Printer to hose directly, with option to have fan on window side when/if I make it)
Case for Boost Converter
Window Side