Ankermake M5C 5015 Fans Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stabilize 5015 fans on your Ankermake M5C. Use with "AnkerMake M5C part cooling fans upgrade" ducts.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 552
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
If you've printed the "AnkerMake M5C part cooling fans upgrade" you can use this to stabilize your fans.
https://www.printables.com/model/607759-ankermake-m5c-part-cooling-fans-upgrade
Uses friction fit on the top fan screw hole and clamps around what I suspect is the filament feed motor.
Very quickly prototyped but seems to be an improvement over just letting the fans rattle around =)
Thanks to everyone who has tried it out and flagged issues with the original file! (The original STL file had some open edges that were fixed using the “Windows repair algorithm" in Ankermake Studio. I first uploaded that repaired 3mf file, and now I've replaced the STL with a repaired file from IMGtoSTL.)