1 / 6
Walksnail Moonlight and Caddx GM3 Gimbal Mount with Fan and Cage — zdjęcie 1
1 / 6

Walksnail Moonlight and Caddx GM3 Gimbal Mount with Fan and Cage

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Just a simple mount for the VTX and Gimbal that you can use or modify to fit your needs.

Ocena
4,75 / 5
Polubienia
51
Pobrania
950
Wydruki
4
Wyświetlenia
3230
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

Just a simple mount for the Walksnail VTX and new Caddx GM3 Gimbal that you can use or modify to fit your needs. It has an additional mount for 40mm cooling fan, because  the Moonlight VTX heats up very quickly without an active airflow. You can also attach the antena to the back to keep them in place.

To assembly it you will need some M2 screws and threaded inserts.


Check it out in action: 


To print it I used TitanX filament from FormFutura

The VTX 3D model I used:
https://www.printables.com/model/921779-walksnail-avatar-moonlight-4k
The GM3 3D model I used:
https://caddxfpv.com/pages/download-center

Tagi