Teenage Engineering Computer-1 Case Mod Plates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mod plates to greatly increase airflow.
- Ocena
- 0 / 5
- Polubienia
- 55
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 2221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Having bought this case I was immediately disappointed by the lack of core functionality. This case in its stock configuration is an oven for your computer components, the GPU is starved for air, as is the CPU. So I designed these printable mod-plates to remedy this situation, the GPU now has a front-vent and a large fan-vent on top of the case, the front panel has a vent on the bottom of the case allowing a convective effect to take place in the case.
I have also added a double USB type A panel cut-out.
Requires M3 heat inserts and M3x6mm Bolts (Button head is best)