1 / 2
Hanging Wind Spinner
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This hanging wind spinner is built up of interlocking vanes to be as high as you want.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 597
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
This hanging wind spinner is built up of as many vanes as you'd like. Just keep printing!
Design features
- Vanes are interlocking to maintain alignment (glue is optional).
- Chamfered centre channel for easy threading.
- These vanes have a 3 degree twist angle for a gentle curve.
Printing instructions
- Print the vanes as oriented in the .stl file.
- You shouldn’t need any supports.
- Print as many as you like.
- Choose a material suitable for the outdoor application.
- Tip: a transparent rainbow filament makes a great effect.
Installation instructions
- Make sure the vanes are all oriented the same way (so the grooves fit into the channels).
- Thread a small string or cord through the centre channel.
- Tie a knot at the bottom to keep it from falling off.
- Hang it as appropriate. You may find my Tie Wrap Screw Anchor useful.
Notes
- Thank you to BCE_Gatien for your Vertical Wind Spinner that inspired me to make this model.
- Like most of my models, I've designed this with OpenSCAD and it is fully parameterized. If you would like a modification (e.g., dimensions, twist angle, etc.), just send me a message.