Prusa I3 MK3s Hemera Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mounting system for E3D Hemera Direct Kit Extruder. https://e3d-online.com/products/e3d-hemera-direct-kit-1-7
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 185
- Wydruki
- 4
- Wyświetlenia
- 1972
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The original https://www.prusaprinters.org/prints/35611-prusa-i3-mk3s-hemera-upgrade-30 is great. But I found few uncomfortable issues so I fixed it!
Improvements:
- PINDA mount.
- Extruder mounting system is horizontal instead of vertical. It makes maintenance much easier/comfortable.
- It uses 2 screws to secure extruder instead of 1. It stops extruder wobbling completely.
- You do not need to print with supports anymore.
- Cable management.
Software modification for HEMERA needed
For HEMERA, you need to modify E-steps. Visit Prusa Slicer -> printer setup (last tab) -> custom G-code. Do not forget to save the settings as separate “printer”. :)
The custom code
M92 E786.5 // sets your extruder to 786.5 steps/mm
M500 // save settings
---
WIP
Filament sensor mount
Resource: https://www.prusaprinters.org/prints/54869-protubevr-mk3s-mmuv2-mod-for-hemera
WIP-hemera-senzor-parts-2022.stl = unmodified resources
WIP-hemera-senzor-top-2022.stl = slightly modified resource
WIP-hemera-extruder-mount-senzor-2022.stl = combination of parts from resource and my hemera-extruder-mount-2022
I am currently testing the version with senzor, it is not a final product!