Logic Probe tester with CD4001 IC case holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HiI created the container for the logic probe when our electronics club was building the logic probe with the CD4001…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Hi
I created the container for the logic probe when our electronics club was building the logic probe with the CD4001 IC and I did not want to use a pipe for a container.
Circuit comes from https://www.allaboutcircuits.com/projects/diy-tools-build-your-own-logic-probe/ Please read above article to understand the working of the circuit.
I wanted it to be easy to make at home so used Vero board for the circuit board. Vero board layout was done in "Do It Yourself Layout Creator".
I added a white led with a switch in the front of probe to use as a light if circuit board area too dark.
Cut the LED's legs so that the LED's protrude about 3mm above the IC but check that the overall height still smaller than container inside. When board placed inside container and LED's pressed into holes, wedge something below board to keep it in place.
Print Settings
Printer:
P3 Steel
Rafts:
No
No
Filament: Verbatim ABS Blue
Category: Electronics