Ball Chair Caster Caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Caps that hold casters perpendicular to the ground for Isokinetics Inc. Brand Adjustable Fitness Ball Chair
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
A friend broke their office chair and needed new caps to hold the casters correctly. I modeled this in Fusion 360 and printed in PETG with like 20 walls so it turned it into 100% infill. I recommend drilling a small hole and using a small screw to prevent the caps from rotating in the legs as that would cause the chair to roll poorly or not at all.
This is for the Isokinetics Inc. Brand Adjustable Fitness Ball Chair available on Amazon at https://www.amazon.com/Isokinetics-Brand-Adjustable-Fitness-Chair/dp/B00QLAIOYM
Yes, we replaced the wheels with better ones also from Amazon.
I think this is as close as I've come to reinventing the wheel thus far. LOL